A, deployment tank classification

1, according to the structural form, it is divided into: the upper cover under the oblique bottom, the upper cover under the conical head, the upper and lower chain head, the upper and lower oval head

2, according to the heating method is divided into: steam heating, electric heating

3, according to the volume size is divided into :100-10000L and other specifications, can also be designed and manufactured according to the actual needs of customers.

Two, deployment tank structure

The equipment is divided into cylinder block, cylinder head, stirring paddle, feed port, discharge valve are made of imported stainless acid resistant steel 1Cr18Ni9Ti, according to GB741-80 technical conditions, cylinder block polishing, there is a stirring paddle, play a stirring role. The top of the cycloidal needle wheel planetary reducer, driving the stirring propeller, and can be assembled and disassembled and cleaned, and there are two open cylinder head for cleaning, the bottom of the cylinder is inclined, easy to empty, the other two feed port, can be connected with the pipe, easy to continue into a variety of ingredients, with discharge port, can be installed on the plug valve after mixing evenly, rotate the plug valve handle 90 degrees can be discharged, After feeding, close to achieve the purpose of mixing evenly.

Three, deployment tank characteristics

1, the container insulation material is made of high temperature resistant, anti-aging polyurethane foam or pearl cotton.

2, the interface adopts the international standard ISO quick chuck type, the liner is made of imported stainless steel SUS316L or SUS304, the inner surface mirror polishing to Ra≤0.28μm, the outer surface polishing matte, mirror, sandblasting or cold rolling primary color matte, in line with GMP medical standards.

3, the seal of the agitator adopts imported sanitary mechanical stirring seal or magnetic fully sealed stirring device, stirring speed can be selected.

4, the pipe port is provided with a liquid level gauge port (static pressure type, capacitance type, non-contact type, ultrasonic type, glass tube type), air breathing port, thermometer (digital display or dial type), CIP cleaning port, sight mirror, explosion-proof light (sight mirror and light integration), SIP sterilization port, inlet and outlet of liquid and sanitary manhole.

5, volume of 100L-10000L and other specifications, can also be designed and manufactured according to the actual needs of customers.

6. Relevant GMP verification data (including material report, certificate of purchased parts, verification form, etc.) will be attached.