Advantages and disadvantages of CIP cleaning machine

The CIP cleaning system is a closed-circuit cycle in the pipeline and production line of the equipment, without the need to disassemble the equipment. This technology is called local cleaning and is widely used in highly mechanized manufacturing enterprises. CIP cleaning can improve product safety, save running time and improve efficiency; Save labor, ensure the safety of operation, prolong the service life of production equipment. Let's take a look at the advantages and disadvantages of fully automatic CIP cleaners.

The chemical function of CIP cleaning is mainly generated by the addition of chemical reagents, which is the main factor determining the cleaning effect. General manufacturers can choose detergents according to the nature and degree of pollution of the cleaning object, material, water quality, cleaning method chosen, cost and safety. The commonly used detergents are acid-base detergents and sterilizing detergents.

Automatic CIP cleaning machine is composed of acid and base two tanks.

The advantages of acid-base detergent are: it can kill all microorganisms; Removal of organic matter is better.

Disadvantages: strong irritation to the skin; Poor washability.

The advantages of fungicide are: sterilization effect is fast, effective for all microorganisms; Generally non-toxic after dilution; Not affected by water hardness; Forming a thin film on the surface of the equipment; Concentration is easy to measure; Easy to measure; It gets rid of the stench.

Fully automatic CIP cleaning machine

The disadvantages are: special taste; Require certain storage conditions; The bactericidal effect of different concentration is very different. Easy to freeze when the temperature is low; Improper usage can cause side effects; The bactericidal effect of mixed dirt decreased obviously. It is easy to pollute the environment and leave traces when spraying water.

Acid in acid-base detergent refers to 1%-2% nitric acid solution, and alkali refers to 1%-3% sodium hydroxide used at 65℃-80℃. Fungicides are commonly used chlorine fungicides, such as sodium subchlorite. At a given flow rate, the higher the thermal energy temperature, the smaller the viscosity coefficient and the larger the Reynolds number (Re). Temperature rise can usually change the physical state of dirt, accelerate the speed of chemical reaction, increase the solubility of dirt, make the impurity solution fall off in the cleaning process, so as to improve the cleaning effect and shorten the cleaning time. The amount of motion energy is measured by Re.

For you to introduce the automatic cip cleaning machine products and product advantages

Introduction to automatic cip cleaning machine.

CIP is the abbreviation of English CleaningInPlace, which means cleaning in place. Defined as without removing the inner cavity and components of the equipment, under sealed conditions, with a solution with a certain flow rate, temperature and concentration. The technology was originally used in the US dairy industry. In 1955, CIP system combined with automatic control technology, widely used in sauce and vinegar food, beer, beverage, cosmetics, biopharmaceutical and other fields. CIP cleaning equipment (tanks, tubes, heat exchangers, cleaning pumps, liquid pumps, control cabinets) and the entire cleaning system are cleaned and disinfected in a closed loop without manual decomposition or opening. In situ cleaning, referred to as CIP, also known as spot cleaning or automatic cleaning.

Ii. Advantages of cip cleaning equipment:

1.CIP cleaning system has low economic operation cost, compact structure and small footprint. Easy to install and maintain, can effectively clean cylinder containers, pipelines and other production equipment. The cleaning process is all operated in closed production equipment, cylinder containers and pipelines, greatly reducing the chance of secondary contamination.

2. The system can be divided into one to four routes according to production needs. Dragon is two and more than two roads, can be cleaned at the same time or more than two areas, can also be in the production process while cleaning. This will greatly reduce CIP cleaning time.

3. The pneumatic diaphragm pump imported from the United States absorbs strong acid and alkali, which not only improves the integrity of the equipment, reduces the maintenance rate of the equipment, and reduces the operating cost.

4. The extracorporeal circulation system can effectively reduce energy consumption.

5. The backwater system can effectively reduce the water consumption of the thermal power plant.

6. Medium hot water system.

7. Especially automatic CIP, can detect cleaning liquid automatically. Liquid filling, discharge, display adjustment, reliable operation, high degree of automation, simple operation, good cleaning effect, in line with the modern large fluid medicine and food processing technology of health requirements and production environment requirements.

8. Stable CIP in situ cleaning, man-machine interface image display.

9. Automatically switch the process parameters, automatically adjust the cleaning time, pH value, temperature and other parameters.

10. You can choose manual or automatic control.

11. All operations can be recorded to facilitate GMP certification.

12.CIP cleaning systems are available in single tank, double tank, multi-tank, mobile and fixed.